• 欢迎来到萘析商城
1-癸烯_872-05-9,1-癸烯
图片仅供参考,具体产品以实物为准!

1-癸烯

BW901013 {{goodObj.price > 0 ? '¥' + goodObj.price : '咨询'}} ¥{{goodObj.sell_price || 0}} 咨询 872-05-9 0.5mL {{goodObj.date}} 秦境 {{item.norm}} 99.0% {{inventory}}
1-癸烯介绍:

Reference Material

This certificate is designed in accordance with ISO 17034 and ISO Guide 31. This reference material (RM) was designed,produced and verified in accordance with ISO/IEC 17025, ISO 17034 and a registered quality management system ISO9001.

Uncertainty

The certified value(s) and uncertainty(ies) are determined in accordance with ISO 17034 with an 95% confidence level (k=2). Uncertainty is based on the Total Combined Uncertainty, including uncertainties of characterisation, homogeneity and stability testing. Stability values are based on real evidence opposed to simulation.

The producer certifies that this reference material meets the specification stated in this certificate until the expiry date, provided it is stored unopened at the recommended temperature herein. Product warranties for this reference material are set out in the terms and conditions of purchase.

Intended Use

This RM is intended for use in a laboratory as a calibration and quality control standard or in method development for analytical techniques.

Safety

Proper precautions should be observed while handling. See Safety Data Sheet.

Traceability

The balances used for gravimetric measurements are calibrated with weights traceable to the national standards (DKD). The calibration of the balances is verified daily internally and annually by an external accredited calibration service. Chromatographic methods are traceable to the International System of Units (SI).

Homogeneity

Random replicate samples of the final packaged RM have been analysed to prove homogeneity compliant with ISO 17034.

Storage

The RM should be stored in the original sealed container at the indicated temperature.

Instructions for use

It is recommended to use 1 mg as the minimum sample size and if less material is used, to increase the certified uncertainty by a factor of two for half sample and four for a quarter of sample. If storage after opening is necessary, the RM should be tightly closed and kept from light and moisture. If the RM was in a sealed ampoule, it should be transferred to a vial with minimum head space.


您正在浏览的产品:1-癸烯

手机版:1-癸烯

本公司销售的所有产品仅供实验科研使用,不用于人体及临床诊断。

标准名称及标准号
国家标准:GB/T 6324.8-2014
标准名称:有机化工产品试验方法 第8部分:液体有机化工产品中微量烃类的测定 气相色谱法
适用范围
适用于液态有机化工产品中微量烃类化合物(包括1-癸烯)的定量检测,检测对象为纯度≥99%的有机液体,通过气相色谱法分离并测定其含量。
核心检测方法
采用气相色谱法(GC),配备氢火焰离子化检测器(FID)。样品经稀释或直接进样,通过色谱柱分离目标化合物,内标法或外标法定量。
检出限与定量限
烃类化合物检出限为0.1 mg/kg,定量限为0.5 mg/kg(以1-癸烯为例)。方法灵敏度取决于仪器性能与色谱条件优化。
质控样品要求
需使用空白样品、平行样品及加标回收样品进行质控。加标回收率应为80%-120%,平行样相对偏差≤10%。
关键实验步骤
1. 样品预处理:根据含量稀释或直接进样;
2. 色谱条件设定:优化载气流速、柱温程序及检测器温度;
3. 标准曲线绘制:用系列浓度标准溶液建立线性关系(R²≥0.995);
4. 进样分析:采用自动或手动进样,记录峰面积;
5. 数据计算:内标法或外标法计算1-癸烯含量。
特别说明
1. 1-癸烯为易挥发物质,需避免长时间暴露于空气中;
2. 若样品基质复杂,需优化前处理方法(如蒸馏、萃取);
3. 色谱柱建议使用非极性或弱极性毛细管柱(如DB-1)。

以上信息仅供参考,请以相应标准的原文为准!