• 欢迎来到萘析商城
当前位置: 首页 标准物质 有机类 单标 乙酸异丁酯
乙酸异丁酯_110-19-0,乙酸异丁酯
图片仅供参考,具体产品以实物为准!

乙酸异丁酯

BW901055 {{goodObj.price > 0 ? '¥' + goodObj.price : '咨询'}} ¥{{goodObj.sell_price || 0}} 咨询 110-19-0 0.5mL {{goodObj.date}} 秦境 {{item.norm}} 99.5% {{inventory}}
乙酸异丁酯介绍:

Reference Material

This certificate is designed in accordance with ISO 17034 and ISO Guide 31. This reference material (RM) was designed,produced and verified in accordance with ISO/IEC 17025, ISO 17034 and a registered quality management system ISO9001.

Product Name

Acetic acid-isobutyl ester

Product Code

BW901055

Lot Number

23041553

CAS No.

110-19-0

Mol. Formula

C6H12O2

Mol. Weight

116.16

Certified on

26 Apr 2023

Expiry Date

25Apr 2025

Storage Temp

20°C ± 4°C

Specification

0.5 mL

CERTIFIED

Purity

CERTIFIED

Expanded Uncertainty (U)

Approved by

99.5%

0.5%

Uncertainty

The certified value(s) and uncertainty(ies) are determined in accordance with ISO 17034 with an 95% confidence level (k=2). Uncertainty is based on the Total Combined Uncertainty, including uncertainties of characterisation, homogeneity and stability testing. Stability values are based on real evidence opposed to simulation.

The producer certifies that this reference material meets the specification stated in this certificate until the expiry date, provided it is stored unopened at the recommended temperature herein. Product warranties for this reference material are set out in the terms and conditions of purchase.

Intended Use

This RM is intended for use in a laboratory as a calibration and quality control standard or in method development for analytical techniques.

Safety

Proper precautions should be observed while handling. See Safety Data Sheet.

Traceability

The balances used for gravimetric measurements are calibrated with weights traceable to the national standards (DKD). The calibration of the balances is verified daily internally and annually by an external accredited calibration service. Chromatographic methods are traceable to the International System of Units (SI).

Homogeneity

Random replicate samples of the final packaged RM have been analysed to prove homogeneity compliant with ISO 17034.

Storage

The RM should be stored in the original sealed container at the indicated temperature.

Instructions for use

It is recommended to use 1 mg as the minimum sample size and if less material is used, to increase the certified uncertainty by a factor of two for half sample and four for a quarter of sample. If storage after opening is necessary, the RM should be tightly closed and kept from light and moisture. If the RM was in a sealed ampoule, it should be transferred to a vial with minimum head space.


您正在浏览的产品:乙酸异丁酯

手机版:乙酸异丁酯

本公司销售的所有产品仅供实验科研使用,不用于人体及临床诊断。

室内空气质量标准
标准名称及标准号 GB/T 18883-2002《室内空气质量标准》
适用范围 适用于住宅、办公建筑物等室内环境中挥发性有机化合物(VOCs)的检测,包括乙酸异丁酯等酯类物质。
核心检测方法 采用气相色谱法(GC)或气相色谱-质谱联用法(GC-MS)对空气中的酯类物质进行定性与定量分析。
检出限与定量限 检出限为0.01 mg/m³,定量限为0.05 mg/m³(基于GC-MS方法)。
质控样品要求 需使用空白样品、平行样品和加标回收率验证(回收率范围80%-120%)。
关键实验步骤 1. 空气采样使用Tenax吸附管;2. 热脱附后进样分析;3. 标准曲线法计算浓度。
特别说明 采样时需避开强气流环境,实验室温度需控制在25±2℃以确保数据稳定性。
环境空气 挥发性有机物的测定
标准名称及标准号 HJ 583-2010《环境空气 挥发性有机物的测定 吸附管采样-热脱附/气相色谱-质谱法》
适用范围 适用于环境空气中乙酸异丁酯等挥发性有机物(VOCs)的检测,覆盖浓度范围0.5-100 μg/m³。
核心检测方法 吸附管采样后经热脱附处理,通过GC-MS进行分离与定量分析。
检出限与定量限 方法检出限为0.3 μg/m³(采样体积10 L时),定量下限为1.0 μg/m³。
质控样品要求 每批次样品需包含10%平行样,相对偏差≤20%;运输空白样浓度需低于检出限。
关键实验步骤 1. 吸附管活化处理;2. 流量校准(0.1-0.5 L/min);3. 热脱附温度280℃;4. 质谱全扫描模式定性。
特别说明 采样后需在4℃以下保存并7日内完成分析,避免吸附管穿透现象。
GBZ/T 160-2007 工作场所空气有毒物质测定
标准名称及标准号 GBZ/T 160.62-2007《工作场所空气有毒物质测定 酯类化合物》
适用范围 适用于职业卫生场所中乙酸异丁酯等酯类化合物的空气浓度监测。
核心检测方法 溶剂解吸-气相色谱法,使用聚丙烯FFAP毛细管色谱柱分离。
检出限与定量限 方法检出限为0.5 μg/mL(采气量15 L时对应0.03 mg/m³),定量范围为0.5-100 μg/mL。
质控样品要求 每20个样品需做1个加标回收样,回收率需在85%-110%之间。
关键实验步骤 1. 活性炭管采样;2. 二硫化碳解吸30分钟;3. 进样量1 μL分流比10:1;4. FID检测器分析。
特别说明 采样时应佩戴防护装备,避免高浓度暴露;解吸液需进行纯度验证。

以上信息仅供参考,请以相应标准的原文为准!