• 欢迎来到萘析商城
当前位置: 首页 标准物质 有机类 单标 乙酸甲酯
乙酸甲酯_79-20-9,乙酸甲酯
图片仅供参考,具体产品以实物为准!

乙酸甲酯

BW901053
¥200
¥200
79-20-9
0.5mL
秦境
99.5%
0
乙酸甲酯介绍:

Reference Material

This certificate is designed in accordance with ISO 17034 and ISO Guide 31. This reference material (RM) was designed,produced and verified in accordance with ISO/IEC 17025, ISO 17034 and a registered quality management system ISO9001.

Product Name

Acetic acid-methyl ester

Product Code

BW901053

Lot Number

23041551

CAS No.

79-20-9

Mol. Formula

C3H6O2

Mol. Weight

74.08

Certified on

26 Apr 2023

Expiry Date

25Apr 2025

Storage Temp

20°C ± 4°C

Specification

0.5 mL

CERTIFIED

Purity

CERTIFIED

Expanded Uncertainty (U)

Approved by

99.5%

0.5%

Uncertainty

The certified value(s) and uncertainty(ies) are determined in accordance with ISO 17034 with an 95% confidence level (k=2). Uncertainty is based on the Total Combined Uncertainty, including uncertainties of characterisation, homogeneity and stability testing. Stability values are based on real evidence opposed to simulation.

The producer certifies that this reference material meets the specification stated in this certificate until the expiry date, provided it is stored unopened at the recommended temperature herein. Product warranties for this reference material are set out in the terms and conditions of purchase.

Intended Use

This RM is intended for use in a laboratory as a calibration and quality control standard or in method development for analytical techniques.

Safety

Proper precautions should be observed while handling. See Safety Data Sheet.

Traceability

The balances used for gravimetric measurements are calibrated with weights traceable to the national standards (DKD). The calibration of the balances is verified daily internally and annually by an external accredited calibration service. Chromatographic methods are traceable to the International System of Units (SI).

Homogeneity

Random replicate samples of the final packaged RM have been analysed to prove homogeneity compliant with ISO 17034.

Storage

The RM should be stored in the original sealed container at the indicated temperature.

Instructions for use

It is recommended to use 1 mg as the minimum sample size and if less material is used, to increase the certified uncertainty by a factor of two for half sample and four for a quarter of sample. If storage after opening is necessary, the RM should be tightly closed and kept from light and moisture. If the RM was in a sealed ampoule, it should be transferred to a vial with minimum head space.


您正在浏览的产品:乙酸甲酯

手机版:乙酸甲酯

本公司销售的所有产品仅供实验科研使用,不用于人体及临床诊断。

标准名称及标准号
标准名称工业用乙酸甲酯
标准号GB/T 3728-2007
适用范围
本标准适用于以乙酸和甲醇为原料生产的工业用乙酸甲酯的质量控制,包括纯度、水分、酸度等关键指标的检测。
核心检测方法
气相色谱法通过色谱柱分离样品中的乙酸甲酯,利用氢火焰离子化检测器(FID)进行定量分析。
水分测定采用卡尔·费休法(Karl Fischer)测定样品中微量水分含量。
检出限与定量限
气相色谱法检出限0.01%(质量分数)
卡尔·费休法定量限10 mg/kg(水分含量)
质控样品要求
平行样分析每批次样品需进行至少2次平行实验,相对偏差≤5%。
加标回收率回收率应控制在90%-110%范围内。
关键实验步骤
样品前处理称取0.1g样品,用无水乙醇稀释至10mL,摇匀后过0.45μm滤膜。
色谱条件进样口温度250℃,检测器温度300℃,柱温箱程序升温从40℃至200℃(5℃/min)。
特别说明
乙酸甲酯为易挥发、易燃液体,实验过程中需远离火源并保持通风。检测时应避免使用塑料容器,以防溶解干扰。

以上信息仅供参考,请以相应标准的原文为准!