• 欢迎来到萘析商城
二苯醚_101-84-8
图片仅供参考,具体产品以实物为准!

二苯醚

BW902002 {{goodObj.price > 0 ? '¥' + goodObj.price : '咨询'}} ¥{{goodObj.sell_price || 0}} 咨询 101-84-8 100mg {{goodObj.date}} 秦境 {{item.norm}} 99.8% {{inventory}}
二苯醚介绍:

Reference Material

This certificate is designed in accordance with ISO 17034 and ISO Guide 31. This reference material (RM) was designed,produced and verified in accordance with ISO/IEC 17025, ISO 17034 and a registered quality management system ISO9001.

Uncertainty

The certified value(s) and uncertainty(ies) are determined in accordance with ISO 17034 with an 95% confidence level (k=2). Uncertainty is based on the Total Combined Uncertainty, including uncertainties of characterisation, homogeneity and stability testing. Stability values are based on real evidence opposed to simulation.

The producer certifies that this reference material meets the specification stated in this certificate until the expiry date, provided it is stored unopened at the recommended temperature herein. Product warranties for this reference material are set out in the terms and conditions of purchase.

Intended Use

This RM is intended for use in a laboratory as a calibration and quality control standard or in method development for analytical techniques.

Safety

Proper precautions should be observed while handling. See Safety Data Sheet.

Traceability

The balances used for gravimetric measurements are calibrated with weights traceable to the national standards (DKD). The calibration of the balances is verified daily internally and annually by an external accredited calibration service. Chromatographic methods are traceable to the International System of Units (SI).

Homogeneity

Random replicate samples of the final packaged RM have been analysed to prove homogeneity compliant with ISO 17034.

Storage

The RM should be stored in the original sealed container at the indicated temperature.

Instructions for use

It is recommended to use 1 mg as the minimum sample size and if less material is used, to increase the certified uncertainty by a factor of two for half sample and four for a quarter of sample. If storage after opening is necessary, the RM should be tightly closed and kept from light and moisture. If the RM was in a sealed ampoule, it should be transferred to a vial with minimum head space.


您正在浏览的产品:二苯醚

手机版:二苯醚

本公司销售的所有产品仅供实验科研使用,不用于人体及临床诊断。

标准名称及标准号
GB/T 5750.8-2023《生活饮用水标准检验方法 第8部分:有机物指标》
适用范围
本标准适用于生活饮用水及其水源水中二苯醚等挥发性有机物的检测,包括但不限于水源污染评估和饮用水处理工艺监测。
核心检测方法
气相色谱-质谱联用法(GC-MS)。样品经液液萃取或固相萃取富集后,通过色谱分离和质谱定性定量分析。
检出限与定量限
二苯醚的检出限为0.01 μg/L,定量限为0.03 μg/L。低于定量限需重新富集或采用高灵敏度仪器。
质控样品要求
每批次样品需包含空白样、平行样及加标回收样。加标浓度应为待测物浓度的0.5~2倍,回收率需在80%~120%范围内。
关键实验步骤
1. 样品预处理:水样用二氯甲烷萃取,浓缩至1 mL;
2. 色谱条件:DB-5MS色谱柱,程序升温从50℃至300℃;
3. 质谱扫描模式:全扫描(Scan)或选择离子监测(SIM)。
特别说明
1. 二苯醚易受实验室溶剂污染,需严格控制空白;
2. 若水样含悬浮物,需经0.45 μm滤膜过滤;
3. 标准溶液需现配现用,避光保存不超过24小时。

以上信息仅供参考,请以相应标准的原文为准!