• 欢迎来到萘析商城
1-十二烯_112-41-4,1-十二烯
图片仅供参考,具体产品以实物为准!

1-十二烯

BW901001 {{goodObj.price > 0 ? '¥' + goodObj.price : '咨询'}} ¥{{goodObj.sell_price || 0}} 咨询 112-41-4 0.5mL {{goodObj.date}} 秦境 {{item.norm}} 96.0% {{inventory}}
1-十二烯介绍:

Reference Material

This certificate is designed in accordance with ISO 17034 and ISO Guide 31. This reference material (RM) was designed,produced and verified in accordance with ISO/IEC 17025, ISO 17034 and a registered quality management system ISO9001.

Uncertainty

The certified value(s) and uncertainty(ies) are determined in accordance with ISO 17034 with an 95% confidence level (k=2). Uncertainty is based on the Total Combined Uncertainty, including uncertainties of characterisation, homogeneity and stability testing. Stability values are based on real evidence opposed to simulation.

The producer certifies that this reference material meets the specification stated in this certificate until the expiry date, provided it is stored unopened at the recommended temperature herein. Product warranties for this reference material are set out in the terms and conditions of purchase.

Intended Use

This RM is intended for use in a laboratory as a calibration and quality control standard or in method development for analytical techniques.

Safety

Proper precautions should be observed while handling. See Safety Data Sheet.

Traceability

The balances used for gravimetric measurements are calibrated with weights traceable to the national standards (DKD). The calibration of the balances is verified daily internally and annually by an external accredited calibration service. Chromatographic methods are traceable to the International System of Units (SI).

Homogeneity

Random replicate samples of the final packaged RM have been analysed to prove homogeneity compliant with ISO 17034.

Storage

The RM should be stored in the original sealed container at the indicated temperature.

Instructions for use

It is recommended to use 1 mg as the minimum sample size and if less material is used, to increase the certified uncertainty by a factor of two for half sample and four for a quarter of sample. If storage after opening is necessary, the RM should be tightly closed and kept from light and moisture. If the RM was in a sealed ampoule, it should be transferred to a vial with minimum head space.


您正在浏览的产品:1-十二烯

手机版:1-十二烯

本公司销售的所有产品仅供实验科研使用,不用于人体及临床诊断。

国家标准解读:工业用高纯度烯烃中微量杂质的测定 气相色谱法(GB/T 12688.1-2019)
标准名称及标准号 GB/T 12688.1-2019《工业用高纯度烯烃中微量杂质的测定 气相色谱法》
适用范围 适用于1-十二烯等工业用高纯度烯烃中微量杂质(如非烃类、低分子烃)的测定,杂质浓度范围0.1 mg/kg~100 mg/kg。
核心检测方法 采用氢火焰离子化检测器(FID)的气相色谱法,通过毛细管柱(极性或非极性)分离杂质组分,外标法定量。
检出限与定量限 典型杂质的检出限(LOD)为0.05 mg/kg,定量限(LOQ)为0.1 mg/kg。
质控样品要求 需使用有证标准物质进行校准曲线验证,每批次样品至少分析1个空白样及2个平行样,相对偏差应≤15%。
关键实验步骤 1. 样品预处理:低温保存避免挥发,直接进样;
2. 色谱条件优化:柱温箱程序升温(初始50℃→终温250℃);
3. 数据处理:峰面积积分排除溶剂干扰。
特别说明 若样品中水分含量>100 mg/kg,需预先脱水处理;高沸点杂质可能影响柱效,建议定期老化色谱柱。

以上信息仅供参考,请以相应标准的原文为准!