除草醚
-
化学需氧量溶液标准物质/COD-Cr
BW02087-80-500 | 80μg/mL
-
标准物质/甲醇中呋虫胺溶液标准物质
BW08113 | 1000μg/mL
-
(冰袋运输)硫化物标样
BW02085d | 1mg/L左右
-
(冰袋运输)硫化物标样
BW02085d | 10mg/L左右
-
乙醇中2,4-二硝基苯酚溶液标准物质
SDS137946K | 1000μg/mL
除草醚
Reference Material
This certificate is designed in accordance with ISO17034 and ISO Guide 31. This reference material (RM) was designed,produced andverified in accordance with ISO/IEC 17025, ISO 17034 and a registered qualitymanagement system ISO9001.
Product Name
Nitrofen
Product Code
BW902026
Lot Number
23061513
CAS No.
1836-75-5
Mol. Formula
C12H7Cl2NO3
Mol. Weight
284.09
Certified on
2 Jun 2023
Expiry Date
1 Jun 2025
Storage Temp
20°C ± 4°C
Specification
100 mg
CERTIFIED
Purity
CERTIFIED
Expanded Uncertainty (U)
Approved by
99.9%
0.5%
Uncertainty
The certified value(s) and uncertainty(ies) aredetermined in accordance with ISO 17034 with an 95% confidence level (k=2). Uncertaintyis based on the Total Combined Uncertainty, including uncertainties ofcharacterisation, homogeneity and stability testing. Stability values are basedon real evidence opposed to simulation.
The producer certifies that this reference materialmeets the specification stated in this certificate until the expiry date,provided it is stored unopened at the recommended temperature herein. Productwarranties for this reference material are set out in the terms and conditionsof purchase.
ntended Use
This RM is intended for use in a laboratory as acalibration and quality control standard or in method development foranalytical techniques.
Safety
Proper precautions should be observed whilehandling. See Safety Data Sheet.
Traceability
The balances used for gravimetric measurements arecalibrated with weights traceable to the national standards (DKD). Thecalibration of the balances is verified daily internally and annually by anexternal7 accredited calibration service. Chromatographic methods are traceableto the International System of Units (SI).
Homogeneity
Random replicate samples of the final packaged RMhave been analysed to prove homogeneity compliant with ISO 17034.
Storage
The RM should be stored in the original sealedcontainer at the indicated temperature.
Instructions for use
It is recommended to use 1 mg as the minimum samplesize and if less material is used, to increase the certified uncertainty by afactor of two for half sample and four for a quarter of sample. If storageafter opening is necessary, the RM should be tightly closed and kept from lightand moisture. If the RM was in a sealed ampoule, it should be transferred to avial with minimum head space.