• 欢迎来到萘析商城
当前位置: 首页 标准物质 无机类 单标 磺胺二甲异嘧啶钠盐
磺胺二甲异嘧啶钠盐_2462-17-1
图片仅供参考,具体产品以实物为准!

磺胺二甲异嘧啶钠盐

BW905011 {{goodObj.price > 0 ? '¥' + goodObj.price : '咨询'}} ¥{{goodObj.sell_price || 0}} 咨询 2462-17-1 250mg {{goodObj.date}} 秦境 {{item.norm}} 99.9% {{inventory}}
磺胺二甲异嘧啶钠盐介绍:

This certificate is designed in accordance with ISO 17034 and ISO Guide 31. This reference material (RM) was designed,produced and verified in accordance with ISO/IEC 17025, ISO 17034 and a registered quality management system ISO9001.

Product Name

Sulfisomidine sodium

Product Code

BW905011

Lot Number

23061534

CAS No.

2462-17-1

Mol. Formula

C12H13N4O2S.Na

Mol. Weight

301.31

Certified on

2 Jun 2023

Expiry Date

1 Jun 2025

Storage Temp

20°C ± 4°C

Specification

250 mg

CERTIFIED

Purity

CERTIFIED

Expanded Uncertainty (U)

Approved by

99.9%

0.5%

Uncertainty

The certified value(s) and uncertainty(ies) are determined in accordance with ISO 17034 with an 95% confidence level (k=2). Uncertainty is based on the Total Combined Uncertainty, including uncertainties of characterisation, homogeneity and stability testing. Stability values are based on real evidence opposed to simulation.

The producer certifies that this reference material meets the specification stated in this certificate until the expiry date, provided it is stored unopened at the recommended temperature herein. Product warranties for this reference material are set out in the terms and conditions of purchase.

Intended Use

This RM is intended for use in a laboratory as a calibration and quality control standard or in method development for analytical techniques.

Safety

Proper precautions should be observed while handling. See Safety Data Sheet.

Traceability

The balances used for gravimetric measurements are calibrated with weights traceable to the national standards (DKD). The calibration of the balances is verified daily internally and annually by an external7 accredited calibration service. Chromatographic methods are traceable to the International System of Units (SI).

Homogeneity

Random replicate samples of the final packaged RM have been analysed to prove homogeneity compliant with ISO 17034.

Storage

The RM should be stored in the original sealed container at the indicated temperature.

Instructions for use

It is recommended to use 1 mg as the minimum sample size and if less material is used, to increase the certified uncertainty by a factor of two for half sample and four for a quarter of sample. If storage after opening is necessary, the RM should be tightly closed and kept from light and moisture. If the RM was in a sealed ampoule, it should be transferred to a vial with minimum head space.


您正在浏览的产品:磺胺二甲异嘧啶钠盐

手机版:磺胺二甲异嘧啶钠盐

本公司销售的所有产品仅供实验科研使用,不用于人体及临床诊断。

国家标准解读:磺胺类药物残留检测相关标准
标准名称及标准号 GB/T 22956-2008 动物源性食品中磺胺类药物残留量的测定 液相色谱-串联质谱法
适用范围 适用于动物源性食品(如肌肉、肝脏、肾脏、牛奶、鸡蛋等)中磺胺二甲异嘧啶钠盐等磺胺类药物残留量的测定。
核心检测方法 采用液相色谱-串联质谱法(LC-MS/MS),通过乙腈提取样品中的目标物,经固相萃取净化后上机检测。
检出限与定量限 检出限(LOD):0.5 μg/kg;
定量限(LOQ):1.0 μg/kg。
质控样品要求 1. 实验须包含空白样品和加标样品;
2. 加标回收率应控制在70%-120%范围内;
3. 质控样品需与待测样品同步处理。
关键实验步骤 1. 样品均质后加入乙腈振荡提取;
2. 离心后取上清液经MCX固相萃取柱净化;
3. 氮吹浓缩后复溶,过滤上机分析;
4. 使用C18色谱柱分离,质谱多反应监测(MRM)模式检测。
特别说明 1. 实验过程中需避免接触塑料制品以防干扰;
2. 质谱参数需根据仪器型号优化;
3. 实验废弃物须按危险化学品规定处理。

以上信息仅供参考,请以相应标准的原文为准!