苯甲醛
-
甲基橙吸收储备液(甲基橙分光光度法)(GBZ/T 160.37)氯气吸收液
SJRY100 | 0.1g/L
-
标样/挥发酚标样
BW02067d | 100μg/L左右
-
二硫化碳中乙腈/丙烯腈混标/GB/T 5750.8-2023-17.1
BW08138d | 质控50μg/mL
-
次溴酸钠溶液符合GBZ/T300.47-2017(7)砷化氢的溶液吸收-二乙氨基二硫代甲酸银分光光度法
SJRY97 | 合GBZ/T300.47-2017(7)砷化氢的溶液吸收-二乙氨基二硫代甲酸银分光光度法
-
抗坏血酸溶液
SJRY98 | 0.02g/L
苯甲醛
Reference Material
This certificate is designed in accordance with ISO 17034 and ISO Guide 31. This reference material (RM) was designed,produced and verified in accordance with ISO/IEC 17025, ISO 17034 and a registered quality management system ISO9001.
Product Name
Benzaldehyde
Product Code
BW901016
Lot Number
23041215
CAS No.
100-52-7
Mol. Formula
C7H6O
Mol. Weight
106.12
Certified on
17 Apr 2023
Expiry Date
16 Apr 2025
Storage Temp
(0~4)°C
Specification
0.5mL
CERTIFIED
Purity
CERTIFIED
Expanded Uncertainty (U)
Approved by
99.5%
0.5%
Uncertainty
The certified value(s) and uncertainty(ies) are determined in accordance with ISO 17034 with an 95% confidence level (k=2). Uncertainty is based on the Total Combined Uncertainty, including uncertainties of characterisation, homogeneity and stability testing. Stability values are based on real evidence opposed to simulation.
The producer certifies that this reference material meets the specification stated in this certificate until the expiry date, provided it is stored unopened at the recommended temperature herein. Product warranties for this reference material are set out in the terms and conditions of purchase.
Intended Use
This RM is intended for use in a laboratory as a calibration and quality control standard or in method development for analytical techniques.
Safety
Proper precautions should be observed while handling. See Safety Data Sheet.
Traceability
The balances used for gravimetric measurements are calibrated with weights traceable to the national standards (DKD). The calibration of the balances is verified daily internally and annually by an external accredited calibration service. Chromatographic methods are traceable to the International System of Units (SI).
Homogeneity
Random replicate samples of the final packaged RM have been analysed to prove homogeneity compliant with ISO 17034.
Storage
The RM should be stored in the original sealed container at the indicated temperature.
Instructions for use
It is recommended to use 1 mg as the minimum sample size and if less material is used, to increase the certified uncertainty by a factor of two for half sample and four for a quarter of sample. If storage after opening is necessary, the RM should be tightly closed and kept from light and moisture. If the RM was in a sealed ampoule, it should be transferred to a vial with minimum head space.