• 欢迎来到萘析商城
四氯化碳_56-23-5,四氯化碳
图片仅供参考,具体产品以实物为准!

四氯化碳

BW901002 {{goodObj.price > 0 ? '¥' + goodObj.price : '咨询'}} ¥{{goodObj.sell_price || 0}} 咨询 56-23-5 1mL {{goodObj.date}} 秦境 {{item.norm}} 96.6% {{inventory}}
四氯化碳介绍:

Reference Material

This certificate is designed in accordance with ISO 17034 and ISO Guide 31. This reference material (RM) was designed,produced and verified in accordance with ISO/IEC 17025, ISO 17034 and a registered quality management system ISO9001.

Product Name

Tetrachloromethane

Product Code

BW901002

Lot Number

23041503

CAS No.

56-23-5

Mol. Formula

CCl4

Mol. Weight

153.82

Certified on

6 Apr 2023

Expiry Date

5 Apr 2025

Storage Temp

(0~4)°C

Specification

1.0mL

CERTIFIED

Purity

CERTIFIED

Expanded Uncertainty (U)

Approved by

96.6%

0.5%

Uncertainty

The certified value(s) and uncertainty(ies) are determined in accordance with ISO 17034 with an 95% confidence level (k=2). Uncertainty is based on the Total Combined Uncertainty, including uncertainties of characterisation, homogeneity and stability testing. Stability values are based on real evidence opposed to simulation.

The producer certifies that this reference material meets the specification stated in this certificate until the expiry date, provided it is stored unopened at the recommended temperature herein. Product warranties for this reference material are set out in the terms and conditions of purchase.

Intended Use

This RM is intended for use in a laboratory as a calibration and quality control standard or in method development for analytical techniques.

Safety

Proper precautions should be observed while handling. See Safety Data Sheet.

Traceability

The balances used for gravimetric measurements are calibrated with weights traceable to the national standards (DKD). The calibration of the balances is verified daily internally and annually by an external accredited calibration service. Chromatographic methods are traceable to the International System of Units (SI).

Homogeneity

Random replicate samples of the final packaged RM have been analysed to prove homogeneity compliant with ISO 17034.

Storage

The RM should be stored in the original sealed container at the indicated temperature.

Instructions for use

It is recommended to use 1 mg as the minimum sample size and if less material is used, to increase the certified uncertainty by a factor of two for half sample and four for a quarter of sample. If storage after opening is necessary, the RM should be tightly closed and kept from light and moisture. If the RM was in a sealed ampoule, it should be transferred to a vial with minimum head space.


您正在浏览的产品:四氯化碳

手机版:四氯化碳

本公司销售的所有产品仅供实验科研使用,不用于人体及临床诊断。

标准名称及标准号
GB 11894-1989《水质 总氮的测定 碱性过硫酸钾消解紫外分光光度法》
适用范围
本标准适用于地表水、地下水、生活污水和工业废水中总氮的测定。当使用四氯化碳作为萃取剂时,可用于含复杂基质的水样前处理。
核心检测方法
采用碱性过硫酸钾消解结合紫外分光光度法。消解后的样品在220nm和275nm波长处测定吸光度,通过标准曲线法计算总氮含量。
检出限与定量限
方法检出限为0.05mg/L,定量限为0.20mg/L。当使用四氯化碳萃取时,需验证回收率是否满足70%-120%的要求。
质控样品要求
每批次样品应包含至少10%的平行样、空白样和加标回收样。四氯化碳纯度需≥99.9%,并定期进行空白实验以验证试剂干扰。
关键实验步骤
1. 样品保存:水样需用硫酸酸化至pH≤2,4℃冷藏并7日内完成分析;
2. 消解程序:在120℃条件下消解30分钟,冷却后加入四氯化碳萃取干扰物质;
3. 比色测定:使用10mm石英比色皿,扣除275nm处的背景干扰。
特别说明
1. 四氯化碳属于有毒试剂,操作需在通风橱中进行;
2. 当水样含有大量油脂或色度时,需增加四氯化碳萃取次数;
3. 标准物质需使用国家认证的氮标准溶液,临用现配。

以上信息仅供参考,请以相应标准的原文为准!