• 欢迎来到萘析商城
当前位置: 首页 标准物质 有机类 单标 乙二醇二甲醚
乙二醇二甲醚_110-71-4,1,2-二甲氧基乙烷
图片仅供参考,具体产品以实物为准!

乙二醇二甲醚

BW903004 {{goodObj.price > 0 ? '¥' + goodObj.price : '咨询'}} ¥{{goodObj.sell_price || 0}} 咨询 110-71-4 1mL {{goodObj.date}} 秦境 {{item.norm}} 99.7% {{inventory}}
乙二醇二甲醚介绍:

Reference Material

This certificate is designed in accordance with ISO 17034 and ISO Guide 31. This reference material (RM) was designed,produced and verified in accordance with ISO/IEC 17025, ISO 17034 and a registered quality management system ISO9001.

Uncertainty

The certified value(s) and uncertainty(ies) are determined in accordance with ISO 17034 with an 95% confidence level (k=2). Uncertainty is based on the Total Combined Uncertainty, including uncertainties of characterisation, homogeneity and stability testing. Stability values are based on real evidence opposed to simulation.

The producer certifies that this reference material meets the specification stated in this certificate until the expiry date, provided it is stored unopened at the recommended temperature herein. Product warranties for this reference material are set out in the terms and conditions of purchase.

Intended Use

This RM is intended for use in a laboratory as a calibration and quality control standard or in method development for analytical techniques.

Safety

Proper precautions should be observed while handling. See Safety Data Sheet.

Traceability

The balances used for gravimetric measurements are calibrated with weights traceable to the national standards (DKD). The calibration of the balances is verified daily internally and annually by an external7 accredited calibration service. Chromatographic methods are traceable to the International System of Units (SI).

Homogeneity

Random replicate samples of the final packaged RM have been analysed to prove homogeneity compliant with ISO 17034.

Storage

The RM should be stored in the original sealed container at the indicated temperature.

Instructions for use

It is recommended to use 1 mg as the minimum sample size and if less material is used, to increase the certified uncertainty by a factor of two for half sample and four for a quarter of sample. If storage after opening is necessary, the RM should be tightly closed and kept from light and moisture. If the RM was in a sealed ampoule, it should be transferred to a vial with minimum head space.


您正在浏览的产品:乙二醇二甲醚

手机版:乙二醇二甲醚

本公司销售的所有产品仅供实验科研使用,不用于人体及临床诊断。

相关标准解读
标准名称及标准号 GB/T 23986-2009《色漆和清漆 挥发性有机化合物(VOC)含量的测定 气相色谱法》
适用范围 适用于涂料、胶黏剂等化工产品中挥发性有机物(包括乙二醇二甲醚等溶剂)的含量测定。
核心检测方法 通过气相色谱法(GC)分离并定量样品中的乙二醇二甲醚,使用内标法或外标法进行校正。
检出限与定量限 检出限(LOD)为0.1 mg/m³,定量限(LOQ)为0.3 mg/m³(依据仪器灵敏度和前处理方法可能有所差异)。
质控样品要求 需使用空白样品、加标回收样品(添加已知浓度乙二醇二甲醚)及平行样进行质量控制,回收率应在80%-120%之间。
关键实验步骤 1. 样品预处理:采用顶空进样或溶剂萃取法;
2. 色谱条件优化:设定柱温程序(如初始60℃,每分钟升温10℃至200℃);
3. 校准曲线绘制:至少5个浓度点,相关系数≥0.995。
特别说明 实验需在通风良好的环境中进行,避免乙二醇二甲醚蒸气对人体危害;若样品含高沸点杂质,可能干扰检测结果,需优化色谱条件或进行净化处理。

以上信息仅供参考,请以相应标准的原文为准!