正丁醇_单标_有机类_标准物质_萘析商城

图片仅供参考，具体产品以实物为准！

正丁醇

BW901112

~~{{goodObj.price > 0 ? '￥' + goodObj.price : '咨询'}}~~

￥{{goodObj.sell_price || 0}} 咨询

秦境

99.7%

猜您喜欢

正丁醇
BW901112 | 99.7%
正丁醇
BW2997-1mL | ≥99%
正丁醇
1ST6708-10ml | 见证书
正丁醇
1ST6708-1ml | 见证书
正丁醇
1ST6708-5ml | 见证书
正丁醇
1ST6708-1ml | 见证书
正丁醇
CCFD200012 | 93.8%

正丁醇介绍：

REFERENCE MATERIAL CERTIFICATE

Reference Material

This certificate is designed in accordance with ISO 17034 and ISO Guide 31. This reference material (RM) was designed,produced and verified in accordance with ISO/IEC 17025, ISO 17034 and a registered quality management system ISO9001.

Product Name	1-Butanol
Product Code	BW901112
Lot Number	23091522
CAS No.	71-36-3
Mol. Formula	C₄H₁₀O
Mol. Weight	74.12
Certified on	13 Sep 2023
Expiry Date	12 Sep 2028
Storage Temp	20°C ± 4°C
Specification	1g

CERTIFIED

Purity

CERTIFIED

Expanded Uncertainty (U)

Approved by

99.7%

1.0%

Uncertainty

The certified value(s) and uncertainty(ies) are determined in accordance with ISO 17034 with an 95% confidence level (k=2). Uncertainty is based on the Total Combined Uncertainty, including uncertainties of characterisation, homogeneity and stability testing. Stability values are based on real evidence opposed to simulation.

The producer certifies that this reference material meets the specification stated in this certificate until the expiry date, provided it is stored unopened at the recommended temperature herein. Product warranties for this reference material are set out in the terms and conditions of purchase.

Intended Use

This RM is intended for use in a laboratory as a calibration and quality control standard or in method development for analytical techniques.

Safety

Proper precautions should be observed while handling. See Safety Data Sheet.

Traceability

The balances used for gravimetric measurements are calibrated with weights traceable to the national standards (DKD). The calibration of the balances is verified daily internally and annually by an external accredited calibration service. Chromatographic methods are traceable to the International System of Units (SI).

Homogeneity

Random replicate samples of the final packaged RM have been analysed to prove homogeneity compliant with ISO 17034.

Storage

The RM should be stored in the original sealed container at the indicated temperature.

Instructions for use

It is recommended to use 1 mg as the minimum sample size and if less material is used, to increase the certified uncertainty by a factor of two for half sample and four for a quarter of sample. If storage after opening is necessary, the RM should be tightly closed and kept from light and moisture. If the RM was in a sealed ampoule, it should be transferred to a vial with minimum head space.