• 欢迎来到萘析商城
当前位置: 首页 标准物质 有机类 单标 乙酸正丁酯
乙酸正丁酯_
图片仅供参考,具体产品以实物为准!

乙酸正丁酯

BW901046 {{goodObj.price > 0 ? '¥' + goodObj.price : '咨询'}} ¥{{goodObj.sell_price || 0}} 咨询 500mg {{goodObj.date}} 秦境 {{item.norm}} 99.7% {{inventory}}
乙酸正丁酯介绍:

Reference Material

This certificate is designed in accordance with ISO 17034 and ISO Guide 31. This reference material (RM) was designed,produced and verified in accordance with ISO/IEC 17025, ISO 17034 and a registered quality management system ISO9001.

Product Name

n-Butylacetate

Product Code

BW901046

Lot Number

23091533

CAS No.

123-86-4

Mol. Formula

C6H12O2

Mol. Weight

116.16

Certified on

13 Sep 2023

Expiry Date

12 Sep 2026

Storage Temp

20°C ± 4°C

Specification

500mg

CERTIFIED

Purity

CERTIFIED

Expanded Uncertainty (U)

Approved by

99.7%

1.0%

Uncertainty

The certified value(s) and uncertainty(ies) are determined in accordance with ISO 17034 with an 95% confidence level (k=2). Uncertainty is based on the Total Combined Uncertainty, including uncertainties of characterisation, homogeneity and stability testing. Stability values are based on real evidence opposed to simulation.

The producer certifies that this reference material meets the specification stated in this certificate until the expiry date, provided it is stored unopened at the recommended temperature herein. Product warranties for this reference material are set out in the terms and conditions of purchase.

Intended Use

This RM is intended for use in a laboratory as a calibration and quality control standard or in method development for analytical techniques.

Safety

Proper precautions should be observed while handling. See Safety Data Sheet.

Traceability

The balances used for gravimetric measurements are calibrated with weights traceable to the national standards (DKD). The calibration of the balances is verified daily internally and annually by an external accredited calibration service. Chromatographic methods are traceable to the International System of Units (SI).

Homogeneity

Random replicate samples of the final packaged RM have been analysed to prove homogeneity compliant with ISO 17034.

Storage

The RM should be stored in the original sealed container at the indicated temperature.

Instructions for use

It is recommended to use 1 mg as the minimum sample size and if less material is used, to increase the certified uncertainty by a factor of two for half sample and four for a quarter of sample. If storage after opening is necessary, the RM should be tightly closed and kept from light and moisture. If the RM was in a sealed ampoule, it should be transferred to a vial with minimum head space.


您正在浏览的产品:乙酸正丁酯

手机版:乙酸正丁酯

本公司销售的所有产品仅供实验科研使用,不用于人体及临床诊断。

国家标准解读:与乙酸正丁酯相关的检测标准
标准名称及标准号 GB/T 23986-2009《涂料中溶剂含量的测定 气相色谱法》
适用范围 适用于涂料产品中乙酸正丁酯等挥发性溶剂的定性及定量分析。
核心检测方法 气相色谱法(GC-FID),采用毛细管色谱柱分离目标组分,外标法定量。
检出限与定量限 检出限为0.01%(质量分数),定量限为0.05%(质量分数)。
质控样品要求 需使用有证标准物质进行校准,平行样相对偏差≤5%,加标回收率应为80%-120%。
关键实验步骤 1. 样品制备:称取1g涂料样品,溶剂萃取后过滤;
2. 色谱条件:DB-5毛细管柱(30m×0.32mm×0.25μm),程序升温起始60℃,保持5min;
3. 进样量:1μL分流进样。
特别说明 若样品含干扰物质需进行前处理(如蒸馏或固相萃取);色谱峰需通过保留时间及质谱确认。
其他相关标准(按相关度排序)
GB/T 5750.8-2023《生活饮用水标准检验方法 有机物指标》 涉及溶剂残留检测,可参考其液液萃取-GC/MS方法检测水中乙酸正丁酯。
GBZ/T 300.65-2017《工作场所空气有毒物质测定 脂类化合物》 规定乙酸正丁酯的职业接触限值(MAC 200mg/m³),检测使用活性炭管采样-溶剂解吸法。
GB 31604.8-2016《食品安全国家标准 食品接触材料及制品 迁移量的测定》 参考其模拟物浸泡-GC法检测食品包装中乙酸正丁酯迁移量。

以上信息仅供参考,请以相应标准的原文为准!