• 欢迎来到萘析商城
当前位置: 首页 标准物质 有机类 单标 乙酸正丁酯
乙酸正丁酯_
图片仅供参考,具体产品以实物为准!

乙酸正丁酯

BW901046 {{goodObj.price > 0 ? '¥' + goodObj.price : '咨询'}} ¥{{goodObj.sell_price || 0}} 咨询 100mg {{goodObj.date}} 秦境 {{item.norm}} 99.7% {{inventory}}
乙酸正丁酯介绍:

Reference Material

This certificate is designed in accordance with ISO 17034 and ISO Guide 31. This reference material (RM) was designed,produced and verified in accordance with ISO/IEC 17025, ISO 17034 and a registered quality management system ISO9001.

Product Name

n-Butylacetate

Product Code

BW901046

Lot Number

23091534

CAS No.

123-86-4

Mol. Formula

C6H12O2

Mol. Weight

116.16

Certified on

13 Sep 2023

Expiry Date

12 Sep 2026

Storage Temp

20°C ± 4°C

Specification

100mg

CERTIFIED

Purity

CERTIFIED

Expanded Uncertainty (U)

Approved by

99.7%

1.0%

Uncertainty

The certified value(s) and uncertainty(ies) are determined in accordance with ISO 17034 with an 95% confidence level (k=2). Uncertainty is based on the Total Combined Uncertainty, including uncertainties of characterisation, homogeneity and stability testing. Stability values are based on real evidence opposed to simulation.

The producer certifies that this reference material meets the specification stated in this certificate until the expiry date, provided it is stored unopened at the recommended temperature herein. Product warranties for this reference material are set out in the terms and conditions of purchase.

Intended Use

This RM is intended for use in a laboratory as a calibration and quality control standard or in method development for analytical techniques.

Safety

Proper precautions should be observed while handling. See Safety Data Sheet.

Traceability

The balances used for gravimetric measurements are calibrated with weights traceable to the national standards (DKD). The calibration of the balances is verified daily internally and annually by an external accredited calibration service. Chromatographic methods are traceable to the International System of Units (SI).

Homogeneity

Random replicate samples of the final packaged RM have been analysed to prove homogeneity compliant with ISO 17034.

Storage

The RM should be stored in the original sealed container at the indicated temperature.

Instructions for use

It is recommended to use 1 mg as the minimum sample size and if less material is used, to increase the certified uncertainty by a factor of two for half sample and four for a quarter of sample. If storage after opening is necessary, the RM should be tightly closed and kept from light and moisture. If the RM was in a sealed ampoule, it should be transferred to a vial with minimum head space.


您正在浏览的产品:乙酸正丁酯

手机版:乙酸正丁酯

本公司销售的所有产品仅供实验科研使用,不用于人体及临床诊断。

国家标准匹配:GB/T 23993-2008 水质 酯类化合物的测定 气相色谱法
标准名称及标准号 GB/T 23993-2008《水质 酯类化合物的测定 气相色谱法》
适用范围 适用于地表水、地下水、生活污水和工业废水中乙酸正丁酯等酯类化合物的检测,检测浓度范围为0.02 mg/L~10 mg/L。
核心检测方法 使用氢火焰离子化检测器(FID)的气相色谱法,采用液液萃取或顶空进样技术预处理样品。
检出限与定量限 检出限为0.005 mg/L,定量限为0.02 mg/L(不同前处理方法可能影响具体数值)。
质控样品要求 每批次样品需包含空白样、平行样及加标回收样,回收率应控制在80%~120%。
关键实验步骤 1. 样品萃取:使用二氯甲烷作为萃取剂;
2. 色谱条件:色谱柱温度程序为50℃保持2 min,以10℃/min升至200℃;
3. 定量分析:采用外标法或内标法定量。
特别说明 需注意乙酸正丁酯与其他酯类化合物的色谱峰分离度,必要时优化色谱柱类型或升温程序。
行业标准匹配: 固定污染源废气 酯类化合物的测定 气相色谱法
标准名称及标准号 HJ 1079-2019《固定污染源废气 酯类化合物的测定 气相色谱法》
适用范围 适用于固定污染源废气中乙酸正丁酯等酯类化合物的测定,最低检出浓度可达0.01 mg/m³。
核心检测方法 吸附管采样后经热脱附或溶剂脱附,结合气相色谱法(FID检测器)分析。
质控样品要求 每10个样品至少分析1个全程空白,相对偏差应小于15%。
关键实验步骤 1. 采样:使用Tenax-TA吸附管;
2. 脱附条件:热脱附温度为280℃;
3. 色谱分析:建议采用DB-WAX色谱柱。

以上信息仅供参考,请以相应标准的原文为准!