• 欢迎来到萘析商城
当前位置: 首页 标准物质 有机类 单标 六甲基二硅氧烷
六甲基二硅氧烷_107-46-0,六甲基二硅氧烷
图片仅供参考,具体产品以实物为准!

六甲基二硅氧烷

BW901007 {{goodObj.price > 0 ? '¥' + goodObj.price : '咨询'}} ¥{{goodObj.sell_price || 0}} 咨询 107-46-0 0.5mL {{goodObj.date}} 秦境 {{item.norm}} 99.0% {{inventory}}
六甲基二硅氧烷介绍:

Reference Material

This certificate is designed in accordance with ISO 17034 and ISO Guide 31. This reference material (RM) was designed,produced and verified in accordance with ISO/IEC 17025, ISO 17034 and a registered quality management system ISO9001.

Product Name

Hexamethyldisiloxane

Product Code

BW901007

Lot Number

23041513

CAS No.

107-46-0

Mol. Formula

C6H18OSi2

Mol. Weight

162.38

Certified on

10 Apr 2023

Expiry Date

9 Apr 2025

Storage Temp

(0~4)°C

Specification

0.5mL

CERTIFIED

Purity

CERTIFIED

Expanded Uncertainty (U)

Approved by

99.0%

0.5%

Uncertainty

The certified value(s) and uncertainty(ies) are determined in accordance with ISO 17034 with an 95% confidence level (k=2). Uncertainty is based on the Total Combined Uncertainty, including uncertainties of characterisation, homogeneity and stability testing. Stability values are based on real evidence opposed to simulation.

The producer certifies that this reference material meets the specification stated in this certificate until the expiry date, provided it is stored unopened at the recommended temperature herein. Product warranties for this reference material are set out in the terms and conditions of purchase.

Intended Use

This RM is intended for use in a laboratory as a calibration and quality control standard or in method development for analytical techniques.

Safety

Proper precautions should be observed while handling. See Safety Data Sheet.

Traceability

The balances used for gravimetric measurements are calibrated with weights traceable to the national standards (DKD). The calibration of the balances is verified daily internally and annually by an external accredited calibration service. Chromatographic methods are traceable to the International System of Units (SI).

Homogeneity

Random replicate samples of the final packaged RM have been analysed to prove homogeneity compliant with ISO 17034.

Storage

The RM should be stored in the original sealed container at the indicated temperature.

Instructions for use

It is recommended to use 1 mg as the minimum sample size and if less material is used, to increase the certified uncertainty by a factor of two for half sample and four for a quarter of sample. If storage after opening is necessary, the RM should be tightly closed and kept from light and moisture. If the RM was in a sealed ampoule, it should be transferred to a vial with minimum head space.


您正在浏览的产品:六甲基二硅氧烷

手机版:六甲基二硅氧烷

本公司销售的所有产品仅供实验科研使用,不用于人体及临床诊断。

国家标准:《室内空气质量标准》(参考附录相关检测方法)
标准名称及标准号
GB/T 18883-2022《室内空气质量标准》
适用范围
适用于室内空气中挥发性有机化合物(TVOC)的检测,包括六甲基二硅氧烷等有机物的监测与控制。
核心检测方法
气相色谱-质谱联用法(GC-MS)。通过吸附管采集空气样品,热脱附后进样分析,定性及定量目标化合物。
检出限与定量限
检出限(LOD)为0.5 μg/m³,定量限(LOQ)为1.5 μg/m³(基于采样体积10 L)。
质控样品要求
1. 每批样品需包含空白样、平行样及加标回收样;
2. 平行样相对偏差≤20%;
3. 加标回收率需在80%-120%范围内。
关键实验步骤
1. 样品采集:使用Tenax-TA吸附管以0.5 L/min流量采集空气样品;
2. 热脱附:280℃脱附5分钟,冷阱聚焦后快速升温进样;
3. 仪器分析:GC-MS采用DB-5MS色谱柱(30 m×0.25 mm×0.25 μm),程序升温条件为40℃保持3分钟,以10℃/min升至250℃。
特别说明
1. 六甲基二硅氧烷易挥发,采样后需立即密封并低温保存;
2. 避免使用含硅酮材质的耗材,以防交叉污染;
3. 校准曲线需覆盖实际样品浓度范围的0.5-100倍。

以上信息仅供参考,请以相应标准的原文为准!