• 欢迎来到萘析商城
2-丁酮_78-93-3,丁酮
图片仅供参考,具体产品以实物为准!

2-丁酮

BW901025 {{goodObj.price > 0 ? '¥' + goodObj.price : '咨询'}} ¥{{goodObj.sell_price || 0}} 咨询 78-93-3 1mL {{goodObj.date}} 秦境 {{item.norm}} 99.5% {{inventory}}
2-丁酮介绍:

Reference Material

This certificate is designed in accordance with ISO17034 and ISO Guide 31. This reference material (RM) was designed,produced andverified in accordance with ISO/IEC 17025, ISO 17034 and a registered qualitymanagement system ISO9001.

Product Name

2-Butanone

Product Code

BW901025

Lot Number

23041533

CAS No.

78-93-3

Mol. Formula

C4H8O

Mol. Weight

72.11

Certified on

18 Apr 2023

Expiry Date

17 Apr 2025

Storage Temp

(0~4)°C

Specification

1 mL

CERTIFIED

Purity

CERTIFIED

Expanded Uncertainty (U)

Approved by

99.5%

0.5%

Uncertainty

The certified value(s) and uncertainty(ies) aredetermined in accordance with ISO 17034 with an 95% confidence level (k=2).Uncertainty is based on the Total Combined Uncertainty, including uncertaintiesof characterisation, homogeneity and stability testing. Stability values arebased on real evidence opposed to simulation.

The producer certifies that this reference materialmeets the specification stated in this certificate until the expiry date,provided it is stored unopened at the recommended temperature herein. Productwarranties for this reference material are set out in the terms and conditionsof purchase.

Intended Use

This RM is intended for use in a laboratory as acalibration and quality control standard or in method development foranalytical techniques.

Safety

Proper precautions should be observed whilehandling. See Safety Data Sheet.

Traceability

The balances used for gravimetric measurements arecalibrated with weights traceable to the national standards (DKD). Thecalibration of the balances is verified daily internally and annually by anexternal accredited calibration service. Chromatographic methods are traceableto the International System of Units (SI).

Homogeneity

Random replicate samples of the final packaged RMhave been analysed to prove homogeneity compliant with ISO 17034.

Storage

The RM should be stored in the original sealedcontainer at the indicated temperature.

Instructions for use

It is recommended to use 1 mg as the minimum samplesize and if less material is used, to increase the certified uncertainty by afactor of two for half sample and four for a quarter of sample. If storageafter opening is necessary, the RM should be tightly closed and kept from lightand moisture. If the RM was in a sealed ampoule, it should be transferred to avial with minimum head space.


您正在浏览的产品:2-丁酮

手机版:2-丁酮

本公司销售的所有产品仅供实验科研使用,不用于人体及临床诊断。

《室内空气质量标准》相关条款解读
标准名称及标准号 GB/T 18883-2022 室内空气质量标准(涉及2-丁酮的检测要求)
适用范围 适用于室内环境空气中2-丁酮污染物的检测,包含办公场所、居住环境等封闭空间空气质量评价
核心检测方法 气相色谱法(GC-FID),采用活性炭吸附管采样,二硫化碳溶剂解吸
检出限与定量限 方法检出限0.02 mg/m³(采样体积10L),定量下限0.08 mg/m³
质控样品要求 每批次需做平行样(相对偏差≤20%),加标回收率应控制在85%-115%范围内
关键实验步骤 1. 样品采集流速控制在0.5 L/min
2. 解吸液需经0.45 μm滤膜过滤
3. 色谱柱推荐使用DB-624毛细管柱
特别说明 实验过程需避免丙酮、异丙醇等极性溶剂干扰,采样管应在4℃避光保存且7日内完成分析
GB 50325-2020《民用建筑工程室内环境污染控制规范》相关条款
标准名称及标准号 GB 50325-2020 民用建筑工程室内环境污染控制规范(2-丁酮检测参照执行)
适用范围 建筑装饰材料释放的2-丁酮检测,重点管控涂料、胶粘剂等材料的污染物释放量
核心检测方法 气候箱法(EN 717-1),温度23℃±0.5℃,湿度45%±3%条件下进行材料释放检测

以上信息仅供参考,请以相应标准的原文为准!