• 欢迎来到萘析商城
当前位置: 首页 标准物质 有机类 单标 邻苯二甲酸丁苄酯
邻苯二甲酸丁苄酯_85-68-7,邻苯二甲酸二(2-乙基-己基)酯
图片仅供参考,具体产品以实物为准!

邻苯二甲酸丁苄酯

BW903012 {{goodObj.price > 0 ? '¥' + goodObj.price : '咨询'}} ¥{{goodObj.sell_price || 0}} 咨询 85-68-7 100mg {{goodObj.date}} 秦境 {{item.norm}} 98.4% {{inventory}}
邻苯二甲酸丁苄酯介绍:

Reference Material

This certificate is designed in accordance with ISO17034 and ISO Guide 31. This reference material (RM) was designed,produced andverified in accordance with ISO/IEC 17025, ISO 17034 and a registered qualitymanagement system ISO9001.

Product Name

Phthalic acid, benzylbutyl ester

Product Code

BW903012

Lot Number

23081508

CAS No.

85-68-7

Mol. Formula

C19H20O4

Mol. Weight

312.36

Certified on

4 Aug 2023

Expiry Date

4 Aug 2028

Storage Temp

20°C ± 4°C

Specification

100 mg

CERTIFIED

Purity

CERTIFIED

Expanded Uncertainty (U)

Approved by

98.4%

1.0%

Uncertainty

The certified value(s) and uncertainty(ies) aredetermined in accordance with ISO 17034 with an 95% confidence level (k=2).Uncertainty is based on the Total Combined Uncertainty, including uncertaintiesof characterisation, homogeneity and stability testing. Stability values arebased on real evidence opposed to simulation.

The producer certifies that this reference materialmeets the specification stated in this certificate until the expiry date,provided it is stored unopened at the recommended temperature herein. Productwarranties for this reference material are set out in the terms and conditionsof purchase.

Intended Use

This RM is intended for use in a laboratory as acalibration and quality control standard or in method development foranalytical techniques.

Safety

Proper precautions should be observed whilehandling. See Safety Data Sheet.

Traceability

The balances used for gravimetric measurements arecalibrated with weights traceable to the national standards (DKD). Thecalibration of the balances is verified daily internally and annually by anexternal7 accredited calibration service. Chromatographic methods are traceableto the International System of Units (SI).

Homogeneity

Random replicate samples of the final packaged RMhave been analysed to prove homogeneity compliant with ISO 17034.

Storage

The RM should be stored in the original sealedcontainer at the indicated temperature.

Instructions for use

It is recommended to use 1 mg as the minimum samplesize and if less material is used, to increase the certified uncertainty by afactor of two for half sample and four for a quarter of sample. If storageafter opening is necessary, the RM should be tightly closed and kept from lightand moisture. If the RM was in a sealed ampoule, it should be transferred to avial with minimum head space.


您正在浏览的产品:邻苯二甲酸丁苄酯

手机版:邻苯二甲酸丁苄酯

本公司销售的所有产品仅供实验科研使用,不用于人体及临床诊断。

国家标准《食品中邻苯二甲酸酯的测定》
标准名称及标准号GB/T 21911-2008《食品中邻苯二甲酸酯的测定》
适用范围适用于食品(含塑料包装接触材料)中邻苯二甲酸酯类化合物的测定,包括邻苯二甲酸丁苄酯(BBP)等16种化合物。
核心检测方法气相色谱-质谱联用法(GC-MS),前处理采用溶剂萃取和固相萃取净化。
检出限与定量限邻苯二甲酸丁苄酯的检出限为0.05 mg/kg,定量限为0.1 mg/kg。
质控样品要求每批次样品需加标空白样品和平行样,加标回收率应为70%-120%,RSD≤15%。
关键实验步骤样品粉碎后用正己烷超声萃取,经硅胶柱净化后浓缩定容,GC-MS选择离子模式(SIM)分析。
特别说明实验过程中需避免塑料器皿接触样品,防止邻苯二甲酸酯污染;标准溶液需避光保存。
行业标准《出口食品中邻苯二甲酸酯的测定》
标准名称及标准号SN/T 3147-2017《出口食品中邻苯二甲酸酯的测定》
适用范围针对出口食品中邻苯二甲酸酯的检测,包括邻苯二甲酸丁苄酯的定量分析。
核心检测方法液相色谱-串联质谱法(LC-MS/MS),前处理采用乙腈萃取和分散固相萃取净化。
检出限与定量限邻苯二甲酸丁苄酯的检出限为0.01 mg/kg,定量限为0.03 mg/kg。
质控样品要求每批样品需至少10%的平行样,加标回收率需满足60%-130%。
关键实验步骤样品均质后加入乙腈振荡提取,经PSA和C18吸附剂净化后离心上清液,LC-MS/MS多反应监测(MRM)分析。
特别说明需验证不同基质样品的前处理效率,必要时调整吸附剂比例。
国家标准《化妆品中邻苯二甲酸酯类物质的测定》
标准名称及标准号GB/T 28599-2020《化妆品中邻苯二甲酸酯类物质的测定》
适用范围适用于化妆品(乳液、膏霜、唇膏等)中邻苯二甲酸酯的检测。
核心检测方法气相色谱-氢火焰离子化检测法(GC-FID),前处理采用甲醇超声提取。
检出限与定量限邻苯二甲酸丁苄酯的检出限为5 mg/kg,定量限为10 mg/kg。
质控样品要求每20个样品需插入1个质控样,重复性条件下RSD≤10%。
关键实验步骤称取样品后用甲醇超声提取30分钟,离心后取上清液过滤膜,GC-FID程序升温分离。
特别说明高油脂基质样品需增加冷冻除脂步骤,避免干扰峰。

以上信息仅供参考,请以相应标准的原文为准!