• 欢迎来到萘析商城
当前位置: 首页 标准物质 有机类 单标 丙烯酸乙酯
丙烯酸乙酯_140-88-5,丙烯酸乙酯
图片仅供参考,具体产品以实物为准!

丙烯酸乙酯

BW901049 {{goodObj.price > 0 ? '¥' + goodObj.price : '咨询'}} ¥{{goodObj.sell_price || 0}} 咨询 140-88-5 0.5mL {{goodObj.date}} 秦境 {{item.norm}} 99.5% {{inventory}}
丙烯酸乙酯介绍:

Reference Material

This certificate is designed in accordance with ISO 17034 and ISO Guide 31. This reference material (RM) was designed,produced and verified in accordance with ISO/IEC 17025, ISO 17034 and a registered quality management system ISO9001.

Product Name

Acrylic acid-ethyl ester

Product Code

BW901049

Lot Number

23041547

CAS No.

140-88-5

Mol. Formula

C5H8O2

Mol. Weight

100.12

Certified on

26 Apr 2023

Expiry Date

25Apr 2025

Storage Temp

20°C ± 4°C

Specification

0.5 mL

CERTIFIED

Purity

CERTIFIED

Expanded Uncertainty (U)

Approved by

99.5%

0.5%

Uncertainty

The certified value(s) and uncertainty(ies) are determined in accordance with ISO 17034 with an 95% confidence level (k=2). Uncertainty is based on the Total Combined Uncertainty, including uncertainties of characterisation, homogeneity and stability testing. Stability values are based on real evidence opposed to simulation.

The producer certifies that this reference material meets the specification stated in this certificate until the expiry date, provided it is stored unopened at the recommended temperature herein. Product warranties for this reference material are set out in the terms and conditions of purchase.

Intended Use

This RM is intended for use in a laboratory as a calibration and quality control standard or in method development for analytical techniques.

Safety

Proper precautions should be observed while handling. See Safety Data Sheet.

Traceability

The balances used for gravimetric measurements are calibrated with weights traceable to the national standards (DKD). The calibration of the balances is verified daily internally and annually by an external accredited calibration service. Chromatographic methods are traceable to the International System of Units (SI).

Homogeneity

Random replicate samples of the final packaged RM have been analysed to prove homogeneity compliant with ISO 17034.

Storage

The RM should be stored in the original sealed container at the indicated temperature.

Instructions for use

It is recommended to use 1 mg as the minimum sample size and if less material is used, to increase the certified uncertainty by a factor of two for half sample and four for a quarter of sample. If storage after opening is necessary, the RM should be tightly closed and kept from light and moisture. If the RM was in a sealed ampoule, it should be transferred to a vial with minimum head space.


您正在浏览的产品:丙烯酸乙酯

手机版:丙烯酸乙酯

本公司销售的所有产品仅供实验科研使用,不用于人体及临床诊断。

1. 标准名称及标准号
GBZ/T 160.70-2007
《工作场所空气有毒物质测定 酯类化合物》
2. 适用范围
本标准适用于工作场所空气中丙烯酸乙酯(CAS:140-88-5)的检测,涵盖定点采样和个体采样方法。
3. 核心检测方法
采用气相色谱法(GC-FID),以活性炭管吸附空气中的丙烯酸乙酯,经二硫化碳解吸后进样分析。
4. 检出限与定量限
检出限(LOD):0.2 μg/mL;定量限(LOQ):0.6 μg/mL(按采样体积15L计)。
5. 质控样品要求
空白样品需平行测定,相对偏差≤10%;标准曲线相关系数≥0.995;加标回收率需控制在85%-115%。
6. 关键实验步骤
采样:以0.5 L/min流量采集空气样品,确保活性炭管前段吸附有效性;分析:解吸液经0.45 μm滤膜过滤后,用HP-5毛细管柱(30 m×0.32 mm×0.25 μm)分离,FID检测器检测。
7. 特别说明
样品需避光保存于4℃以下,解吸后需在24小时内完成分析;干扰物(如其他酯类)需通过色谱条件优化分离。

以上信息仅供参考,请以相应标准的原文为准!