跳至内容
AI采购助手
当前位置: 首页 产品中心 标准物质 有机类 纯品 Abiraterone-d4 N-Oxide Sulfate Triethylamine Salt(en-17) Abiraterone-d4 N-Oxide Sulfate Triethylamine Salt
Abiraterone-d4 N-Oxide Sulfate Triethylamine Salt(en-17) Abiraterone-d4 N-Oxide Sulfate Triethylamine Salt
图片仅供参考,具体产品以实物为准!

Abiraterone-d4 N-Oxide Sulfate Triethylamine Salt(en-17) Abiraterone-d4 N-Oxide Sulfate Triethylamine Salt

A-8245
需咨询
需咨询
100mg
萘析精选
见证书
+
0
Abiraterone-d4 N-Oxide Sulfate Triethylamine Salt介绍:

化合物名称:Abiraterone-d4 N-Oxide Sulfate Triethylamine Salt
同义词:3-((3S,8R,9S,10R,13S,14S)-10,13-dimethyl-3-(sulfooxy)-2,3,4,7,8,9,10,11,12,13,14,15-dodecahydro-1H-cyclopenta[a]phenanthren-17-yl)pyridine 1-oxide-2,4,5,6-d4, triethylamine (1:1)
CAS 号:
其他 CAS 号:1993430-24-2 (free acid, non-labelled)
分子式:C24H27D4NO5S. Et3N
分子量:/
结构式图片:


您正在浏览的产品:Abiraterone-d4 N-Oxide Sulfate Triethylamine Salt

本公司销售的所有产品仅供实验科研使用,不用于人体及临床诊断。

标准名称及标准号
GB/T 37849-2019 液相色谱-质谱联用分析方法通则
适用范围
适用于生物样品或药物中痕量目标化合物(如Abiraterone-d4 N-Oxide Sulfate Triethylamine Salt及其类似物)的定性及定量分析,涵盖前处理、仪器分析及结果验证等环节。
核心检测方法
采用同位素稀释液相色谱-串联质谱法(LC-MS/MS)。通过氘代同位素内标(如Abiraterone-d4)校正基质效应,结合多反应监测(MRM)模式提高检测特异性。
检出限与定量限
目标物的检出限(LOD)≤0.1 ng/mL,定量限(LOQ)≤0.5 ng/mL。需通过连续稀释法验证,并满足信噪比(S/N)≥3(LOD)和≥10(LOQ)。
质控样品要求
每批次需包含空白样品、低/中/高浓度质控样(QC)及加标回收样。QC样品偏差需控制在±15%以内,保留时间偏差≤±2.5%。
关键实验步骤
1. 样品前处理:采用固相萃取(SPE)或蛋白沉淀法去除基质干扰;
2. 色谱条件:C18色谱柱,流动相为0.1%甲酸水-乙腈梯度洗脱;
3. 质谱参数:ESI正离子模式,离子源温度500℃,碰撞能量根据母离子优化。
特别说明
1. Abiraterone-d4 N-Oxide Sulfate Triethylamine Salt需避光保存于-20℃;
2. 实验过程中需监测内标响应稳定性,若波动>20%需重新进样;
3. 需定期校准质谱质量轴,确保质量精度<5 ppm。

以上信息仅供参考,请以相应标准的原文为准!