8 Stable Isotope Labeled PCB Mix Solution in Nonane, 2μg/mL
-
6 Stable Isotope Labeled PCB Mix Solution in Nonane, 1μg/mL
1ST80894-1N | 1mL
-
Stable Isotope Labeled 2 PBDEs Mix Solution in Nonane, 2μg/mL
1ST82048-2N | 1mL
-
3 Stable Isotope Labeled PCBs Mix Solution in Nonane, 0.1μg/mL
1ST82095-0.1N | 1mL
-
8 Stable Isotope Labeled PBDEs Mix Solution in Nonane
1ST80918-VR1-N | 1mL
-
8 Stable Isotope Labeled PBDEs Mix Solution in Nonane
1ST80918-VR2-N | 1mL
-
2 Stable Isotope Labeled PCB Mix Solution in Hexane, 100μg/mL
1ST80973-100H | 1mL
-
2 Stable Isotope Labeled PCB Mix Solution in Hexane, 100μg/mL
1ST80974-100H | 1mL
您正在浏览的产品:壬烷中8种多氯联苯内标混标溶液(GB 5009.190-2014-第一法表A.2&A.4),2μg/mL
手机版:壬烷中8种多氯联苯内标混标溶液(GB 5009.190-2014-第一法表A.2&A.4),2μg/mL
本公司销售的所有产品仅供实验科研使用,不用于人体及临床诊断。
定量限(LOQ):0.05-0.2μg/kg(脂肪类食品)。实际限值需通过方法验证确认,壬烷中内标溶液浓度需根据样品特性调整加标量。
2. 使用壬烷中8种多氯联苯内标混标溶液(表A.4)作为过程内标,在提取前加入样品
3. 回收率控制范围:70%-120%(油脂样品)
4. 每20个样品需插入1个质控样(已知浓度标准物质)
2. 提取:脂肪含量>10%的样品采用正己烷索氏提取8小时
3. 净化:依次通过装有10g硅胶+2g氢氧化钠的层析柱
4. 浓缩:40℃氮吹浓缩至0.5mL,转移至进样小瓶
5. 仪器条件:DB-5MS色谱柱(30m×0.25mm×0.25μm),多反应监测模式(MRM)
2. 表A.2规定目标物包括PCB28/52/101/118/138/153/180
3. 表A.4规定内标物包括PCB-30/65/142/202等8种同位素标记物
4. 当样品PCB含量>50μg/kg时需稀释后重新测定
5. 实验过程需在通风橱中进行,避免溶剂接触皮肤
以上信息仅供参考,请以相应标准的原文为准!